link
Hermak - Cut-to-length Lines, Slitting Lines, Roll Forming Lines

Cut-to-Length Lines

Slitting Lines

Roll Forming for Corrugated Sheets

Roll Forming





CAPABILITY RANGES OF OUR CUT TO LENGTH LINES

Entry Material

  • Cold rolled, hot rolled, galvanized, stainless, prepainted steels
  • Strip width from 500 mm up to 2500 mm
  • Strip thickness from 0.30 mm up to 12 mm
  • Coil weight up to 35 T

Product at Exit

  • Blank length from 300 mm up to 12 m
  • Weight of the pile up to 20 T

Speed

  • Up to 100 m/min with rotary shear system. This system is convenient for material thicknesses up to 3 mm
  • Up to 60 m/min with roll feeder system. This system is convenient for material thicknesses up to 3 mm
  • Up to 45 m/min with flying shear system.This system is convenient for material thicknesses up to 6 mm
  • Up to 20 m/min with flying shear system.This system is convenient for material thicknesses up to 12 mm

GENERAL COMPOSITION OF OUR CUT TO LENGTH LINES

1. Entrance Coil Car

  • V type - operates in canal
  • L type - operates over ground
  • Scissors type - operates over ground

2. Uncoiler

  • Single mandrel uncoiler
  • Uncoiler with double mandrel with different diameter steps for heavy coils

3. Peeler & Pinch Roll Assembly

4. Prestraightener Assembly

  • In thick materials

5. Straightener

  • 4 high leveller
  • 6 high leveller

6. Pit Table

7. System of Length Cutting

  • Roll feed and shear
  • Rotary shear
  • Flying shear
  • Roll feed and flying shear combination (for lines where thin gauge and thick gauge materials are produced together)

8. Stacking System & Line Exit Conveyor

  • Fully automatic stacker with hydraulic or secrew-jack mechanism lifting
  • Fully automatic stacker for materials having sensitive surfaces with hydraulic or jack-screw mechanism lifting
Hermak Mekatronik Mühendisliği ve Makine San. Tic. A.Ş., İstanbul/TÜRKİYE Tel: +90 (216) 307 0444 E-mail: info@hermak.com.tr